Home > Residential ventilation > ReVent BSH
ReVent BSH
OxyVent distinguishes from the ReVent series due to the presence of the Bioxigen sanification duct module. Bioxigen® is the only ion- ization technology which gained a TUV-PROFI CERT.
PURPOSE
• Indoor stale and wet air extraction and fresh air supply by very high efficiency heat recovery, suitable for houses and public/commercial rooms with moderate needing of air renewal.
• Possible integration with existing air heating and air conditioning systems.
• Solution suitable for installation in internal place such as laundries, cellars, technical areas in general, with horizontal connections to air ducts.
• Indoor stale and wet air extraction and fresh air supply by very high efficiency heat recovery, suitable for houses and public/commercial rooms with moderate needing of air renewal.
• Possible integration with existing air heating and air conditioning systems.
• Solution suitable for installation in internal place such as laundries, cellars, technical areas in general, with horizontal connections to air ducts.
-
Series of 3 models to cover up to 700 m3/h airflow rate, for floor installation and composed of:
• Precoated steel casing with double skin panels (15 mm min thick.) insulated by polyurethane foam; precoated steel sheet metal baseframe for floor installation.
• ISO 16890 ePM10 50% efficiency filters on both air intakes; as an option and in place of standard type, ePM1 70% compact filter in polypropylene with low air pressure drop.
• Precoated steel casing with double skin panels (15 mm min thick.) insulated by polyurethane foam; precoated steel sheet metal baseframe for floor installation.
• ISO 16890 ePM10 50% efficiency filters on both air intakes; as an option and in place of standard type, ePM1 70% compact filter in polypropylene with low air pressure drop.
• Air-to-air counterflow polystyrene heat recovery with very high efficiency (up to 95%), already equipped with motorised bypass device and easily removable for cleaning.
• Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
• Front plastic collars fitted with additional airtight rubber gasket.
• Built-in electronic control complete with NTC sensors inside the unit and plug-in type user interface (possibly remotable)
• Wireless control panel and sensors.
• Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors.
• Front plastic collars fitted with additional airtight rubber gasket.
• Built-in electronic control complete with NTC sensors inside the unit and plug-in type user interface (possibly remotable)
• Wireless control panel and sensors.